TMC 63-600 Series ClassOne Workstation

The HyperScope multiphoton imaging system now has advanced imaging capabilities; the introduction of an extended wavelength lens set means you can image deeper and through thin scattering layers in in vivo samples. Learn more here.

TMC 63-600 Series ClassOne Workstation

The all-stainless steel TMC ClassOne Workstation is a high-performance, pneumatic vibration isolation table designed from the floor up for maximum cleanroom compatibility.

Benefits

Reduces vibration by more than 95% at 10Hz

Virtually free of friction, avoiding rolling friction to static friction transitions

Accommodates horizontal displacement by acting as a gimbal

Vertical and horizontal vibration isolation starting at 2 Hz

Isolation is provided by the same Gimbal Piston™ element that provides unsurpassed performance in isolating optical tables, electron microscopes, precision balances, and scanning tunneling microscopes.

The ClassOne Workstation is alcohol-wiped with a lint-free cloth and is double-wrapped in plastic at the factory prior to shipping.

​The Gimbal Piston™ Air Isolator

Provides outstanding isolation in all directions for even the lowest input levels. It is lightly damped and highly responsive to typical, low-amplitude ambient floor vibrations, yet achieves very high damping for gross transient disturbances, such as sudden load changes or bumping the top plate. The result is that Gimbal Piston Isolators provide superior isolation yet will virtually eliminate any gross disturbance within a few seconds. It can also stabilize isolated systems with relatively high centers of gravity without compromising isolation.

Design & Specifications

High input
High input
Vertical = 1.2 Hz, Horizontal = 1.0 Hz
Low input
Low input
Vertical = 1.5 – 2.0 Hz, Horizontal = 1.2 – 1.7 Hz
Isolation efficiency @ 5 Hz
Isolation efficiency @ 5 Hz
Vertical = 70 – 85%, Horizontal = 75 – 90 %
Isolation efficiency @ 10 Hz
Isolation efficiency @ 10 Hz
Vertical = 90 – 97%, Horizontal = 90 – 97%
Recommended load capacity
Recommended load capacity
350 lb (160 kg)
Finish
Finish
Electropolished stainless steel frame, passivated or electropolished stainless steel top
Facilities required
Facilities required
80 psi nitrogen or air

Contact Form