npi electronic MPS-20 One Channel Heater

The HyperScope multiphoton imaging system now has advanced imaging capabilities; the introduction of an extended wavelength lens set means you can image deeper and through thin scattering layers in in vivo samples. Learn more here.

npi electronic MPS-20 One Channel Heater

The MPS-20 heating device is designed for heating purposes in electrophysiological experiments.

It can be used in addition to npi temperature controllers such as MTC-20/2S, TC-10 etc.

npi electronic MPS-20 One Channel Heater
The MPS-20 system is housed in small desktop cabinet that can be placed close to the microscope, with built-in power supply and cooling elements for the power devices

The system guarantees low noise

The MPS-20 controller is delivered with a power cord and a user manual

The output is connected to a high-power regulated stage (DC, continuous operation) for resistive loads. The power output is short circuit protected, the output power is limited electronically. Maximal output voltage is approximately 12 V, the current is limited to 1.5 A (peak).

The output is connected to a high-power regulated stage (DC, continuous operation) for resistive loads. The power output is short circuit protected, the output power is limited electronically. Maximal output voltage is approximately 12 V, the current is limited to 1.5 A (peak).

Digital displays
Digital displays
4 digits, XX.XX V (voltage at power output) or 3 digits X.XX A (current at power output)
Power output
Power output
continuous: 12 V / 1.0 A, peak: 12 V / 1.5 A, short circuit protected
Power requirements
Power requirements
115 / 230V AC, 60 / 50 Hz, fuse 0.5 / 0.25 A slow dimensions: desktop cabinet, 246 mm, 260 mm, 90 mm

Contact Form